Cannabis Grow Rooms

The following is unsubstantiated and may have no truth to them, I came across this information as I was looking to purchase an Odorsok, but anyway here we go.... I have heard that there was a recall of the ODORSOK due to manufacturing defects and the product not performing, the website is currently off line and a few stores that I have contacted to see if they had one in stock, one can't get any stock and another will not stock them due to their poor performance! The other rumor is that they have shut up shop due to legal proceedings against them, I think this is due to someone getting busted as the ODORSOK did not perform as it should have! So if you have an odor…

High all. I have a scrog screen in my room with 4 plants. The screen is 210cm x 210cm. Currently I have 4 x 600 Son-t-Plus on top, and right in the middle of the 4 pots, underneath the screen, i have a 600 facing upwards. Now, on the top i'm looking to beef up the lighting. I'm considering two options. I could A: Put a 1000watt M.H right in the middle of the 4 lights and that would give the whole screen added blue, or, I could add two more 600watt Son-T's. My question is, which is going to be of most benifit? Cheers in advance BB

Hiyas again, Iv read alot about the need for ventilation in grow rooms, and i pretty much understand it, but my curious mind never rests and i need to know more. I got one main question about it, how does one know they have the perfect or imperfect balance of outtake/ intake? Iv got an idea but wasent sure so thought ild run it past you guys. Im thinking, apart from the fresh air all plants need, does the humidity and temperature play a role? i mean, im 99.9% sure they do, so if i had a temp and humidity monitor in the room is that the way to figure out what you need? From what i understand, the Optimum Tempeture is between 20/30 degrees, and humidity 40/60% …

http://www.mwave.com.au/newAU/mwaveAU/prod...sp?SKU=18010188 i have been recommended using 2 for inlet and 2 for exhaust. my grow cupboard is 1.8 x 2.4 x 5.8ft with about 25 cubic feet and i've got a 400w hps kit on it's way (...or at least it f%*king better be). would 2 in and 2 out be acceptable?

Hey guys, Anyone know where to buy darkroom louvers in oz ? I have tried a few photo supply shops but no where seems to have them.

Hi guys, for my first grow I want to veg some plants indoors before planting them outdoors.I'm wondering what light setup would be best for 5 plants, I'm guessing fluros are the way to go. I need to know what sort of globes/tubes and how much light they are going to need. Thanks heaps Jazzm

hey i have been looking for things that i have thought is called a y adaptor to connect my two cfl's into. i havnt been able to find theseany where so i ended up buying something called a Twin PAR 38 fllodlight. the guy at the shop told me that a cfl screw in globe would fit in so i swapped back the bayonet globes i had and got screw in ones. it says on that it is ment for a PAR 38 globe so i hope he is right. i hear you have to strip an electrical cord and then wire it to this holding thing but not sure where the cords go and all that. i left some pictures so hopefully someone can help us out. am i better off taking this thing back and getting something else? if so what …

I needed a spare 600w HPS globe & realized that the company I work for deals with GE Lighting, I contacted a fellow rep in NSW and called a favor and sent him down to GE in Smithfield and what do you know?? I ended up with 2 x Lucagrow 600 watters for well under what I would pay for just one at the local Hydro Shop! I believe that they do sell to the end consumer at the place in Smithfield and also stock complete lowbays or ballasts??, as my good mate called me and asked if I wanted just the globe or the complete unit, once he told me the price I had him grab the two! I also found another wholesaler that will sell wholesale and direct to the public as well, Anart…

Now I know Rose Gardener has asked this before but I am still a little unclear. I have this http://www.arlec.com.au/display.php?pid=101 This is the bottom view In the pic you can clearly see the green line for earth and the L for Loop. Does it matter which way the Active and Neutral go even when using a CFL If it doesnt matter Im away Cheers