Lighting and Ventilation
1,618 topics in this forum
-
- 2 replies
- 862 views
Ok guys and girls. I'm just about ready to kick off the next grow, just waiting for the real estate to do their inspection thing, and for some seeds to arrive. I was checking out what ballasts I have just before, and I came up against an old question I've had on my mind for a while but never resolved, and I hope someone here can put me right. I'm going to run one of my 1kwatt lights. But I have two different ballasts, and I wonder which one is better, as in does one draw more power than the other, one more relibale than the other, produce more light than the other..anything measurable between the two which would make one better than the other? Des one run hotter than …
Last reply by RobbieGanjaSeed, -
- 4 replies
- 856 views
Ok, well I have just finished watching a vid over at YouTube. It was all about UVB and THC and the relationship between the two. Oh, before I forget, here's the link for the vid if anyone is interested. Caution tho, it goes for about 17 minutes. And it got my to thinking how I might try it out on my grow. Apparently UVB is somehow responsible for the production of THC... I have an incandescent UV globe and now I'm planning on adding it to my lighting array when it's time for my babies to flower. Has anyone tried this? Ideas? Feedback? ~Rose.
Last reply by Rose Gardener, -
- 3 replies
- 1k views
i have had 3 plants under a 400 w hps light for about 5 days the plants are about 7 weeks old and there on 12/12 for the last 5 days as well. I cant tell what sex there are yet dose any one now how long that usualy takes after 12/12 to identify? well my main problem is my leaves on my plants are starting to curle up towards the light they look very healthy but its like the leafe just wants to roll up i have my hps 32 cm away from the top of my bigest plant so i dont think it is burnt at all if any one has any advice for me that would be excellent, another question i have is am i flushing my plants right i have them in about 3 gallon pots and flush them with about a gallon…
Last reply by Tom, -
- 5 replies
- 745 views
hi everyone hope you well. now i am in the last step to get the materials to finish my first indoor cab. thanks a lot to everbody that reply my first stupids questions about indoor grow, is really confortable and usefull for me to read post in this forum....i already decided to get seads from nirvana (white widow), due to space i just could make a cab with the next dimensions: 180cm Height X 58cm Wide x 33 cm deep with door, the interior is with reflectant paper i know that is no too big, but i think that i can do something with this. I am thinking in divide by 2 the heigth room so ill be with 2 stations (veg and floration). according with the Lighting & V…
Last reply by cogollo, -
- 0 replies
- 882 views
welli bought a new globe today. i couldnt help my self when i seen 600W HPS globes for $27 on ebay . so just wondering if anyone has used these before and how you went. gnome.
Last reply by garden gnome, -
- 4 replies
- 899 views
So im using a brand new set up. 600w digital ballast, along with pulse start metal halides (sun system) from life light tech. These are supposed to be awesome bulbs. But...im having what i think is a problem, you tell me. There is some sort of "flickering" going on. Its very subtle, but you can tell that the bulbs have some flickering and almost color change from red/blue. With the naked eye, its so bright in there that you cant really tell, but with shades on you can really look at the walls and tell there is a flicker. Now should i be worried about this, or has anyone had this and will it stop? The company said that it could be a cheap ballast, but the ballast is bran…
Last reply by wannado, -
Cool Tubes
by Hobbes- 3 replies
- 813 views
should u be sucking or blowing the air thru?
Last reply by jimbojones5678, -
Computer fan 1 2 3
by eexpee-
- 420 Crew
- 21 replies
- 2.6k views
I have an old computer with a perfectly good fan. But the problem I am facing is how do I adjust the fan so that the power pulg with go into the wall? Or, for those who have done it before, give me some tips on how to give it power? Thanx
Last reply by Al B. Fuct, -
-
-
- 420 Crew
- 6 replies
- 869 views
i have a near new 1000w MH ballast and globe which is too big for my purposes. whould like to swap for 400 or 600W. sydney
Last reply by hano, -
-
-
- 420 Crew
- 4 replies
- 808 views
Any help in choosing which type of fan, where to purchase, approx. cost etc. would be greatly appreciated
Last reply by Luke Skywalker, -
-
-
- 420 Crew
- 1 reply
- 1.4k views
I have it at 80f/26c since i switched to a 600w lamp. I thought i would get a temp increase and sure enough i did. So is this temp ok, or will it be wise to lower it. Good thing is that the humidity dropped from about 60% to about 40% with the increase in heat. thanks - yota
Last reply by Ozzy420, -
-
- 1 reply
- 699 views
I'm building a grow room in a closet with the dimensions of ( H=4FT W=3FT L=2FT). I'm getting a 400w HPS. What I want to know is how much plants could I fit in this area? and how should I go about ventilation. the area I live in never goes below 70degrees summer time . I live in a high place so the air is always circulating through the main room (knocking over pics etc..). The closet have two swivel doors in front and I have the sightest idea how to vent it, any help will be appreciated....One more thing do I need to vent the area for the veg compartment(I was thinking on using a large rubbermaid green container) ? Thanks for the help
Last reply by liquidkush, -
-
- 420 Crew
- 6 replies
- 737 views
Hey guys, setting up a new grow room/wardrobe wanting some advice on air flow. I will have a 400w HPS running inside a fairly standard sized wardrobe which will be located in my laundry. I was going to have a 300mm exhaust fan running from the top with some ducting up to the already established exaust fan in the laundry. This way I can have a timer on the fan that i want to run from the wardrobe and if it gets really hot then i can manually switch on the laundry fan too.. Just wondering peoples thoughts on this one and if anyone knows where a good place to find ducting is (and fans for the matter). Cheers..
Last reply by sinz, -
-
-
- 420 Crew
- 5 replies
- 925 views
Hey guys, Ive just finished my run to waist system and am ready to transplant my little babys into the big room. Just curious on what time of the day is best for lights on and off? (To avoid peak hour/heat) Cheers for any feedback
Last reply by rickyroo, -
-
-
- 420 Crew
- 5 replies
- 750 views
does anyone have any good ideas for me to keep the temp in my room down???have plenty fans but still heats up too much
Last reply by loylty gets u nothing, -