NakedMonk Posted July 4, 2019 Report Share Posted July 4, 2019 My apologies, i forgot to mention and give credit to users of Reddit for those settings. I haven't personally used it yet, I will in a couple hours. I know the Revenger X, as it uses the same chip as my Switcher so those are the instructions for TCR mode. The settings are varied, but the general consensus is those setting that I mentioned. 1 Link to comment Share on other sites More sharing options...
kloud9 Posted July 4, 2019 Report Share Posted July 4, 2019 either press your mode button for 3 seconds or tap mode button 3 times on your touch screenthen scroll down to TCR-M1 and selectthen choose TCR-Set and adjust to 175 and hit select, should take you back to home screen so repeat steps to get back to TCR-M1then choose Power Set and adjust to 45w and hit select, again should take you back to home screen, then adjust your temp to 370-380.That's it, load and goGot it, cheers monks Posted from the OZ Stoners mobile app Link to comment Share on other sites More sharing options...
NakedMonk Posted July 4, 2019 Report Share Posted July 4, 2019 Just had first bowl on the Splinter Z, and at those settings mentioned. Just Amazing..I will play with mod settings and see how much of a difference, but first go is just WOW Posted from the OZ Stoners mobile app 1 Link to comment Share on other sites More sharing options...
NakedMonk Posted July 5, 2019 Report Share Posted July 5, 2019 An update on the Splinter Z. I am taking seriously huge (above normal size for me) rips on the Splinter Z, and they are so smooth and flavoured. Very impressed with it, my only complaint so far is the size of the unit sitting next to me on the side table and I fear I am going to knock it. So to rectify this I am removing the glass mouth piece after a sesh and storing it in the remote control caddy. Link to comment Share on other sites More sharing options...
kloud9 Posted July 5, 2019 Report Share Posted July 5, 2019 Good hey, how long you heat it, before hitting it ? Posted from the OZ Stoners mobile app Link to comment Share on other sites More sharing options...
NakedMonk Posted July 5, 2019 Report Share Posted July 5, 2019 Tonight I played in wattage mode at 45, worked a treat and I personally think it preheated better, so only about a 8 second pre heat Posted from the OZ Stoners mobile app 1 Link to comment Share on other sites More sharing options...
Newbudgrower Posted July 15, 2019 Report Share Posted July 15, 2019 Just on this, I got some fantastic service from Australian vaporisers, quick post.Small oversight item was missed, resent express post and a nice freebie to make up for it.Great service couldn't be happier.Great Aussie Company. I'm not connected in anyway with them just happy customer. 1 Link to comment Share on other sites More sharing options...
kloud9 Posted July 15, 2019 Report Share Posted July 15, 2019 Yeah +1 on the service too, and Splinter Z is pretty good also, loving the hits from it, when I get it right.. Posted from the OZ Stoners mobile app Link to comment Share on other sites More sharing options...
NakedMonk Posted July 15, 2019 Report Share Posted July 15, 2019 Will agree, Australian Vaporizer is incredible with their service. And after 2 orders with High Tech Vaporizer I'm majorly impressed with their service, only place you get a personalized and signed letter explaining the bought item and a few pointers to get you started. What did you end up getting newbud? Not sure if your aware K9, but after playing with the screens from my extreme Q, I had a test fit into the stem of the Splinter Z and they are a direct fit. Now I have around 10 spare screens that I just rotate out, then bulk clean the screens with ISO Posted from the OZ Stoners mobile app 1 Link to comment Share on other sites More sharing options...
Newbudgrower Posted July 15, 2019 Report Share Posted July 15, 2019 Will agree, Australian Vaporizer is incredible with their service. And after 2 orders with High Tech Vaporizer I'm majorly impressed with their service, only place you get a personalized and signed letter explaining the bought item and a few pointers to get you started. What did you end up getting newbud? Not sure if your aware K9, but after playing with the screens from my extreme Q, I had a test fit into the stem of the Splinter Z and they are a direct fit. Now I have around 10 spare screens that I just rotate out, then bulk clean the screens with ISO Posted from the OZ Stoners mobile appFierce mate [emoji38] Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now