Cannabis Grow Rooms

Hey guys just a few questions for ya....was wondering how much light i should be givin my little seedling while its germinating??? and what would be the best temp to keep it at???

My plants not growing would it hurt it if I just threw it into budding? Its 6 in tall and has 3 sets of full leaves of 5 and 7 Ive heard some plants that size if thrown into budding will just make one big cola any truth behind this?

I just installed a 10 inch vent thru the roof . I used 5 ft of flext duct from the roof vent to the ceiling of my project room. I assume it's best to extend this intake vent down to the floor. Will a 10 inch duct handle a good amount of air flow? Where can I find some picts of vent setups for larger rooms? I'm working with a 10 by 10 foot room. I assume a small fan on this intake side will hinder a much larger fan on a separete output vent.

Hi all! Hoping you may be able to help me with this little issue: I purchased a couple of new lucagrow globes, a 400W and 600W, off ebay, along with a ballast for each. The package arrived today, and upon opening the box and moving the bubble-wrap I heard a little squeak! Upon closer inspection it turns out that the filament in the 600W squeaks when the globe is moved. Now, I don't have a shade/globe holder to plug this into the ballast to test it out, and so have no way of knowing if this is a faulty globe or not. Is this normal, or does it sound (haha get it?!? ) like a dodgy light? Just need to know now, as when I get the shades in a few weeks I don't wanna plug th…

I need to know if i am using the correct lighting and also, does the plant look like its stretching??? pls tell me what you think of my little grow room! i am a first time grower and havent got any money! The light is left on overnight, please tell me things i can do to improve the growth of the plant! All suggestions welcome.

It’s been running for more than 8 months and working great. I have set it up drawing through a layer of zeolite as a filter. This layer is adjustable in thickness according to the strength of the odour to be removed. The tray that holds the zeolite can be totally removed to increase flow or when there is no smell and the filter not required. The room air and the cool tube setup both get filtered. It also doubles as a drying box……..note the wire racks at the top in a channel. The expelled as is ducted out the bottom and and exhausted. The pics are with the door removed.

ok i am having lots of heating probs with my 600 watt setup so i am now asking this. i am going to go and buy a 200 watt florecent light and a hydroponics set. i just want to grow the plants . would this be cheaper on electricity and would the heat be much less for them and does florecent lights work good??

I am in the process of buying ducting. I have picked out some stuff from hydro aqua pet but cannot decide between the following. First there is this ducting which is black on the inside but silver on the outside. It looks at though it has no wire to keep it in shape but it is alot cheaper (I save $20). Here is a picture of the first type I speak of. The second type is black on the inside and on the outside as well. Other than that it seems to be the same except it looks as though it has wire support coils in it. Please tell me if it's worth spending the extra for the black/black ducting as opposed to buying black/silver ducting. What are the pros and c…

hi . if your using a 600w light (sodium bulb) metal film around walls, and a 2 speed fan..the grow room is 35c which is 94 f and is very hot. how could you make it cooler cez window is open and it is like a sauna but plants growing ok. also the seeds are a week old how often do you water then etc? any suggestions

I Have a 250W MH bulb how close will i be able to put this to my plants before they burn? i do have an extraction fan that keeps the room at about 24 Degrees. Thanks

A picture of a CF globe, these can be bought at the local supermarket. I have found these lights excellent for mothers and clones, they can be used for growing but HID's are far superior for normal sized grow rooms. CF’s are available in either the standard bayonet style or Edison Screw (ES) as pictured.

Hi everyone, At the moment I have a MH 1000w UNIVERSAL Sylvinia/Sunmaster globe. I am wondering if this is the right type of bulb to use? I am thinking of purchasing the Sunmaster COOL 1000w globe. Then in time for flowering, have purchased a WARM 1000w globe also. If the bulb I already have won't do the job that is. Could someone explain this situation to me please? EDIT: Should I use the Universal globe for veg and buy a WARM globe for flower maybe?

Hi, Can i use a fluro setup from sprout to bud? or do i need metal halides as well? What would be the right fluro for an all purpose grow if it can be done?