Cannabis Grow Rooms

Hi all My room is 2.3m x 1.5m and 2.3m high and im running a 1000w epapallion hps I all ready have a 8inch canfan with carbon filter and silencer but I think it is to big. The hydro guy said that was the right one but im having doughts. Im Having trouble working it out what canfan size is right.

I have spent a little bit of time trying to find a post on anyone who has successfully done a veg to harvest grow using only a 130W CFL- I have spent time on the net trying to find a single actual log on this subject and have found absolutely 0 reports on anyone using a single 130W CFL globe. I have read reports on multiple hoods with 20w globes but never a single 130w globe?--- If you have ever done this I am highly interested to hear your report- thank you.

Hi crew hope this helps some crew this is the proper way to make a fan speed controler an the rite parts {DONT USE CHEAP SHIT PARTS}

Have a cupboard 800mm wide x 1.8m high x 500mm deep I am setting up. Aim to run a 400w HPS & 400w MH light with an electronic ballast under a reflector. I have a 600mm Stove RANGEHOOD which runs 2 fans. Carbon filters are available as well. Do you think this would work ok ??

Hey all, love the site. My question is, for a budget, cupboard setup. Would something like this yield half decent results? Providing you hung (adjustable jack-chain) the downlights within say 20mm of the top of the plant and adjusted up as the plant grew? What if also, you had multiple dowlights hung on varying angles, pointed at the amp (45 degrees facing the plant, 20mm proximity, surrounding each plant, and hung at different heights) The setup im thinking is for 2 plants, 4 - 6 downlights hung off jack chain surounding the plants. Therefor maximum light with minimum heat and wattage. Cheers all.

Just wondering what would be the best way to set the lights up in the main bloom tent, the plan was to have 3 plants going in there but 1 went hermie so i only have 2 in there now, so each one has 1 x 600Whps above it, However my next grow im going to go for 3 again, or maybe even more but im not sure how to go about placing my 2 600w lights... As in the picture, i had them kind of shining light between the pots on each side in an attempt to get even coverage on all 3 plants, Apart from getting another 600w light in there what could i do and how can i place them? I cant get anymore lights as this run has cost me over 1,000$ in power bill for 105 days ( that includes the …

Hey ozstoners! I'm currently working on an extreme budget DWC project, I've got everything set up and got a northern lights auto sprouted and ready to go. The only problem I have left is that through hours of searching online I haven't found out what to buy to power my light. I'm running a 50w E27 LED (blue and red spectrum). Ideally I want the cheapest option I can to be able to supply power to my light. The actual power usage by the globe is 40W so would it be okay if I just got the lamp advertised at Bunnings for $6.50 that uses a 40W globe? Any advice is appreciated, cheers!

heya all thought i just share with you my Macgyver style carbon air filter for a SMALL cupboard. went to bunnings for a few pvc connector pipes and duct tape, already had the silver air tube and pringles container from b4 .. yes you read right a Pringles container! chopped it down to size, put a 'few' holes for ventilation and lightly covered the bottom with activated carbon bits from the pet store (used in aquarium filters) i can easily remove the end to change the carbon when it's not working anymore. and voila a working air filter AND it's running only though a 120mm 240v computer style fan