Jump to content
  • Sign Up

Gazza's Greenhouse


Recommended Posts

Greenhouse positioning.

If you want to grow plants in the greenhouse all year round, including during the winter, it is best that the ridge of the roof runs east-west to maximise light during the darkest months. But, if you are just going to use your greenhouse in spring and summer, then it is advised the ridge runs north-south so both sides of the greenhouse get an equal amount of light.

 

 

Sent from my iPhone using OZ Stoners

Link to comment
Share on other sites

Raised garden beds.

 

Any kind of frame will work, personally I use redgum as it lasts for ever. You can make them in individual rectangles or you can frame around the inside perimeter of green house and just leave a clear walkway in the middle so you can access all sides. Here are a few Options I found online to give you an idea, this is not my work just to show as examples.589df07c415340831cd5eb79932dc3b4.jpgee8dff4fa7e56d5b4f06f7ef82c194f7.jpgcc448831e823067e756812639639109a.jpga42fd90977d77da32a4fefe7eccd9ea6.jpgcdccd4aeca10a137222a36d5abb3931e.jpg notice the little angle brackets in the corner makes the construction process child's play to knock together.

 

 

Posted from the OZ Stoners mobile app

  • Upvote 1
Link to comment
Share on other sites

How do you stop it blowing away ?, 500m up, I'm half that and one of them wouldn't last 5 mins

I use metal stakes about 700mm long. One in each corner and one in the middle. Use a mash hammer to drive steak into ground. Then use tie wire around frame and hole in steak to tie together I'll post pics of this when I get back.

 

 

Posted from the OZ Stoners mobile app

  • Upvote 1
Link to comment
Share on other sites

more on the commercial side of things

From the Department of Primary Industries NSW

 

https://www.dpi.nsw.gov.au/agriculture/horticulture/greenhouse/structures-and-technology/siting

 

Orientation and siting a greenhouse

The orientation of the greenhouse is typically north-south. A lot of emphasis internationally is placed on orientation to maximise light interception in the greenhouse. This is not such an issue in Australia because our light levels are much higher.

Shadows cast by gutters, trusses and equipment in the roof of the greenhouse can lead to uneven light conditions in the crop. As the sun moves from the east to the west during the day, the shadows of the greenhouse structure will also move. An east-west alignment creates structural shadows in the same part of the crop through the day which can affect crop productivity and plant health in this area. Subsequently, to minimise shading effects, greenhouses are generally oriented north-south.

In southern areas of Australia, an east-west orientation may result in slightly more light transmission, but the need for cooling and ventilation is a more important factor under Australian conditions. As you go further north, there is even less difference in light transmission which ever way a greenhouse is oriented. Again, cooling and ventilation and therefore the direction of prevailing winds should be the primary consideration in orienting a structure.

Crop rows are also typically aligned north-south to minimise shading within the crop. In most areas, vents will be on the east and west. The direction of prevailing winds should be taken into consideration, with structures oriented to take advantage of cooling summer breezes.

Where fans are used for forced ventilation, they should be positioned to minimise any likely impact on neighbours.

When siting a greenhouse, you also need to take into consideration the shading effect of vegetative screens and windbreaks. Locating greenhouses against a tree line will result in lower yields because of reduced light levels. Greenhouse covering materials near trees will also become quite dirty, further reducing light transmission.

 

When siting a greenhouse;

  • Favour a property with natural visual screening;
  •  
  • Consider proximity to key markets;
  •  
  • Prevent a direct line of sight between the development and adjoining dwellings or roadways;
  •  
  • Locate new developments, such as additional greenhouses, behind existing structures;
  •  
  • Locate structures with sufficient setbacks from roadsides and boundaries;
  •  
  • Use landscaping, mounding and vegetation to soften the impact of the development;
  •  
  • Keep existing vegetation and landforms wherever practical;
  •  
  • Consider transport routes and the availability of labour and services;
  •  
  • Avoid development in areas that are visually prominent or which are highly exposed, such as ridgelines;
  •  
  • Locate structures so that they follow the contours of the land;
  •  
  • Avoid locating structures on steep slopes (greater than 1 in 5);
  •  
  • Check potential impacts of adjacent land uses in terms of pests, diseases and weeds;
  •  
  • Take note of adjacent sensitive areas (eg. wetlands, waterways, native vegetation) and site greenhouses appropriately.
  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using the community in any way you agree to our Terms of Use and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.