aussie1 Posted July 14, 2007 Report Share Posted July 14, 2007 hey everyoneI normally cut clones from my 2 plants 2 weeks before I start flo.I don't have a mother, I just clone the 2 on veg that are next to go to flo.It normally takes 2 weeks to root under 2 x 36 fluoro's then I turn all 8 x 36 fluoro's on to veg for 5-6 weeks, Then they go under a 600 hpsThis has always worked well for me, good yield and the ultimate of ultimatesmoke.what I would like to know, is after they root, instead of going to full 8 lights and fullstrength nutes, can I keep them on low light (2x 36 watt fluoro's) and half strength nutes(1.0 ec) for 4 weeks, to slow growth right down, without any detrimental effectsthanksaussie1 Link to comment Share on other sites More sharing options...
loylty gets u nothing Posted July 14, 2007 Report Share Posted July 14, 2007 hey aussie1thats wat i do basicallyif im a bit ahead of meselfi leave em in small potsfeed em 1/2 strength nutes,with a mild water of phed water in betweenand leave em in the corner of me vege boxseems to work with no major detrimenle dramasall the bestbil Link to comment Share on other sites More sharing options...
aussie1 Posted July 14, 2007 Author Report Share Posted July 14, 2007 thanks billdo you notice that they stretch anymore than usual, or are slower to take offwhen you do start the veg cycle?Out of interest, how close is your 600 to the top of your buds?I have cool tube - 600 and temp is 28 at top of buds but I am getting masses of light bleaching- buds are around 20-25 cm from outer glass on cool tubethanks aussie Link to comment Share on other sites More sharing options...
loylty gets u nothing Posted July 15, 2007 Report Share Posted July 15, 2007 yepsuffer some stretchbut once back under lightsand the stretchy growth removedsorta like a lolli pop stylethey kick into vege pretty quicki give em a flush then up the nutes to 3/4 strengththen over 10 days bring em up to full strenght and i have me 600w in a chinamankeep it a good 50cm from topsim gettin a cooltube asapthen the fun begins,do u get a bigger yeild with the cool tube?all the bestbil Link to comment Share on other sites More sharing options...
jimbojones5678 Posted July 15, 2007 Report Share Posted July 15, 2007 My clones are stalled until I'm ready for them, I just have to keep the growth pruned back - for the rubbish or new clones - and keep the roots trimmed back as well if they shoot out the sides of the pot.These one's are 3 months old plus...they only have Clone food and ph'ed water. They live under a 130W Spectrum. Jimbo Link to comment Share on other sites More sharing options...
aussie1 Posted July 15, 2007 Author Report Share Posted July 15, 2007 Yes, yield did improve - eventually.Made a huge mistake thinking this new NASA approved foilinsulation that I just put in my roof would keep the heat out ofthe roof, but not so. So the intake air in the roof was not doing anythingto cool tubes as the temp of intake air was just as hot as the room.With a bit of help from some members here, I got it sorted eventually. For the last 4 weeks of last gro I had nice cool air, as I hooked cool tubesup to my 300mm inlet which sucks air conditioned air from room next door.This made a difference of 7oz overall, but I did 2 harvy's and first one was at 6 weekswhich was a bit too soon and probably lost a bit due to the bad timing.Yield would have been better had I waited the full 8-9 weeks for first harvy.hope this helpsaussie PS nice pics jimbo- they look real healthy Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now