Jump to content
  • Sign Up

how to build a scoob billy


Recommended Posts

I started off the year with a bang.. A couple of days ago I smashed my first bily for the year. As I have just about finished my stash and will have to give up till I harvest (prob about 8 weeks) my first for the yearI decided to put off buying another and have been dry piping and scoobing it.. I am not sure who came up with the scoob billy, but I have not seen or heard of anyone using one except for my close circle of friends from the 90's.

 

here's what you'll need:

1x 2 Litre milk bottle

1x aerial (mine is from an old remote control helicopter)

1x pair of pliers or side cutters (or both)

1x lighter

1x small knife

1x decent sized ball of blue tac

post-44235-0-19257700-1358309509_thumb.jpg

 

Step 1: Begin by cutting the aerial down to size so it a bit smaller than the length of the milk bottle

post-44235-0-39433900-1358309774_thumb.jpg

 

Step 2: Using the lighter and knife, put a hole in the lid of the milk bottle (remove the little cardboardy plastic seal thing from the inside the lid) and thread the cut down piece of aerial into the hole. use blue tac to make the seal air tight.

post-44235-0-49403900-1358309987_thumb.jpg

put the lid on to make sure it still fits.

 

Step 4: Using the lighter and knife, make a hole in the milk bottle about halfway along.

post-44235-0-79202400-1358310781_thumb.jpg

 

 

Step 5: put a scoob in the hollow end of the aerial, the end that is going inside the milk bottle.

 

 

post-44235-0-09695100-1358310943_thumb.jpg

Step 6: light the scoob, by puffing on the other end of the aerial.

 

 

post-44235-0-13799800-1358311081_thumb.jpg

Step 7: once the scoob is going along nicely put it in the milk bottle and tighten the lid. Put your thumb over the hole and squeeze gently. you will notice a nice stream of smoke comiing out the end...

 

post-44235-0-71517400-1358311180_thumb.jpgpost-44235-0-77494900-1358311269_thumb.jpg

post-44235-0-81606600-1358311393_thumb.jpg

 

Just for a bit of porn to finish up, here is a few pics of my currrent grow. The 2 that are flowering, I am guessing they are autos, because they are flowering and light they are subjected to every night hasn't hermied them...

post-44235-0-22603300-1358311883_thumb.jpg post-44235-0-95361600-1358312102_thumb.jpgpost-44235-0-28147200-1358312275_thumb.jpg

Enjoy

Puka

post-44235-0-27235000-1358310210_thumb.jpg

Edited by puka
  • Upvote 1
  • Downvote 1
Link to comment
Share on other sites

hang on, hang on. Go back to the part where you explain the bit about the need for the billy. How come you don't just smoke the joint?

 

1x decent sized ball of blue tac

 

Used to have one nearly up to the size of a tennis ball. The EA liked it so she'd order me a packet every month so I could add to it. My aim was to get it to the size of a basketball, it would've been awesome.

 

Also, I haven't heard the word billy in ages. Nearly forgot bongs were called that

Edited by Cerberus
Link to comment
Share on other sites

hang on, hang on. Go back to the part where you explain the bit about the need for the billy. How come you don't just smoke the joint

Gday Cerb,

Something that always annoyed me with joints is that roughly half the joint is wasted because it burns off into the atmosphere.. with the scoob billy no smoke escapes..Plus it is just a bit of fun!!! You know when you have a joint and you pass it to a friend who puts the burning end in their mouth and blows, giving the reciever, what we used to call a shotty.. well it kind of works the same way, only for the whole joint.. Now I havn't really worried to much about it until now that I am running low on smoke.. It's prob been ten years since I built one of these and it was great to have one last night....

 

I don't know why we called it a scoob billy... because it really isn't a billy as we know it.....

Link to comment
Share on other sites

of course, now it makes sense. I thought I was missing something

 

cheers

Get cracking Cerb.. I am interested to see what others think of this contraption!!

 

Used to have one nearly up to the size of a tennis ball. The EA liked it so she'd order me a packet every month so I could add to it. My aim was to get it to the size of a basketball, it would've been awesome.

 

That's be a pretty imoressive blu tac ball.. There's still time mate you can do it!! :)

Link to comment
Share on other sites

Nothing like live Flame, shitty Plastic and tender human Flesh,

 

see : https://cannabis.com...nabis-findings/ ......pay attention to the LOW IQ part

BOOO!!! if you can't make this thing without needing a trip to hospital then you probobly should reconsider geting out of bed in the morning, coz there a whole shitload of more dangerous things out there...

 

Yes the plastic is shitty (if anyine has any ideas on how one could be made using different materials please share!!).. I would be more worried about the plastic fumes that the user would inhale if using this thing constantly, than burning yourself while making it... BTW you don't really need to burn the holes in the palstic, you could just use a knife... Maybe that breaches OH&S too though.. WARNING: Only make this device if you are not a sissy!! rofl

  • Upvote 4
Link to comment
Share on other sites

This is absolutely brilliant. I was considering purchasing a new glass pipe from SmokeWire, but after reading this I may just make my own little device. I have never heard of a scoob billy, and this surprises me because I am a 90's child. I love the idea though. I totally understand trying to conserve every speck of smoke. My biggest complaint about joints has always been my belief that most of it ends up wasted by literally going up in smoke. I am going to build one of these little devices tonight and give it a shot. Thanks for the post!

  • Upvote 1
Link to comment
Share on other sites

This is a great idea for recovering lost smoke :)   On the rare ocassion that I smoke a joint I take a hit and bring the lit end up to my mouth and inhale so I at least recover some of the lost smoke.  Burned myself way too many times than I'd ever admit to doing that but thats what I get for being lazy instead of a stoner engineer like you lol

  • Upvote 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using the community in any way you agree to our Terms of Use and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.