My COCO Neut grow problem!

[Scrub]

Hey guys, I've just started my grow.

I've currently got 2x Burmese Kush in rockwall under my 250Watt Fluro light.

Basically the grow i'm doing is this:

https://cannabis.community.forums.ozstoners.com/topic/33328-coco-how-to-prep-your-coco-and-get-growing/page__p__300423#entry300423 but with perlite mix.

I'm also having a water pump, to pump ph adjusted water/neuts through.

I have the good canna A & B neuts.

Which one do I use for veg?

And which one for flower? I read back but it was kinda..pretty much same on each bottle.

& how often should I do it?

My plants that are in the rockwool are going to go into the pots probably tomorrow & I need to know asap (thanks).

P.S if you could tell me when to neut would be great and if it's like once a day or something can I set my manual timer that pumps water into my pots for my neuts for 15mins for once a day?

 

Cheers ~Scrub

[Scrub]

How's it going Scrub, you need to use the a+b together all the way through. You add part a and mix wait 15 mins and do the same with part b. Wait 15 mins then add any additives. You want to water and achieve 10-20% run off. This should mean 1-2 1 min feeds at the start and 3-4 near the end. You need to monitor your waste and work this out accordingly because everyones pumps are different. I like to water 1-2 hours after lights on and 1-2 hours before lights off with the others spread out during the daylight hours. Hope this helps and good luck!

 

Just looked through the thread that you provided. If you are going to be using 20L pots like that, then the feeds would be a bit less than i described. But in saying that just moniter your run off and adjust your feeding to keep that at 10-20% and you can't go too wrong.

 

What do you mean by 10-20% water run off?

I understood everything else. thanks!

[STONEDAJ69]

you get 10-20% water back at the bottom of the pot - AKA Runoff

[buzzo]

You will find anything over an E.C. of 1.8 will cause problems....Unless you have a hungry breed on your hands.