Cannabis Grow Rooms

Okay Im thinking of buying one of these LED 300w grow lights which are supposed to be equivelant to a 900w HPS.. Has anyone on here had any experience with them before? I cant find too much aussie info on the net and since these are 600 bux I thought I would do a bit of research first... For anyone that wants to check these out the website is http://www.ecoledlights-au.com First has anyone on here grown with LEDs or seen a grow with LEDs? Has anyone heard of these brand of LEDs? The advantages seem to good not to try.. Using 80% less power, inbuilt fans on the light and alot less heat, no ballast needed, no reflector needed and the light is smaller. Also they apparen…

Hey all just scored myself a brand spankin next gen digital ballast 400/600w MH/HPS 600=2.6 amp 400=1.75 amp cold start 2 sec hot start 2 mins sexy bugger eh uni fitting twin turboooo......and the magic switch let ya all know how she runs ....happy times..hm

Hello troops, in setting up a couple of wardrobes and I was thinking that a set of louvres would be the best option since I wanted a passive intake. My problem is that I'm not particularly sure where sells a good range at a reasonable price. Any ideas? If anyone has got them at the moment, where did you get yours from and would you buy them again if you had the choice? Appreciate any feedback. Farmermatt

Ive got a 130w CFL in my wardrobe for vegging, I was just wondering how big I can get my seedlings under there before chicking them in my tent for flowering? And also how far away should they be from the light? I have them as close as possible, all a few centimetres away. Thanks.

Hi guys, I have a problem that I’m hoping someone can help suggest a solutiont to. I have a cabinet grow in which I am running a 400 watt Son T Agro lamp on a 400w Lumatek Digital ballast. My problem is with timers. I started out using a digital timer that I bought online that is supposed to be heavy duty (a JBL 10amp/2400w digital timer with a 30amp relay built in to handle large bursts of power at startups). I’m currently on the 12/12 light cycle and was using this timer to turn the light off and on etc. Problem is that first day it turned the light on ok but the next day I came out and found it had not turned the light on (even though the display on the timer indi…

Just got a 130w CFL cant figureout how to put the bloody reflector together, Coz it didnt come with instructions... Pretty pissed. Has anyone ever put one of these growlush reflectors that have the chains on either end to hold them in shape? its approx 370mm x 600mm with 15 mm lips on two sides. Has anyone ever put these together coz I tried for a couple hours last night and got frustrated like a demon and cant find instructions anywhere on the net.. Thanx

Was just wondering where people had the filters placed either on the inlet side or exhausting side of their exhaust fans, currently have mine on the exhaust and was wondering if it could possibly be hampering the amount of air being vented from the room. Anyone happened to have tried it bothways?

I want a good light to keep a cloning mother in veg cycle! Any comments?

Hi, I was hoping someone may have some knowledge of these 130w cf lamps, and if one is better than the other I was thinking of using one for seedlings and clones They both come in 2700k 6400k & 14000k (marine) The Growbrite at $79-$85 , and the Spectrum $65 I am pressuming for clones and seedling the best one would be 6400k..feel free to correct me Any thoughts on other brands appreciated too Cheers Cunningstunt

I started off with just one 125mm computer fan for the exhaust. Running a 250 Watt 6500K Fluro It wasn't long b4 I needed another fan of the same sort. Now my Girls n Boys are starting to stink things up. So then I bought an Axial 125mm fan and Charcoal Filter. I left the computer fan in place and tapped up the duct. So I have the Computer fan on top of the fridge assisting the Axial fan in pushing the air through the filter. So I now have a 250 Watt HPS and another 100 watts of Fluro's in my fridge. Yep you guessed it I needed more Airflow. So Now I have 2 computer fans pushing in 2 separate 125 mm ducts and two 125mm Axial fans inline with two Charcoal Filters....oh …

as per title, was wondering what type of fan/carbon filter you would recommend for low noise levels, i don't mind wrapping things up but I realy don't want too much noise. the wardrobe im using is around 6.5" tall with a 1.5" shelf in the top (figured I can keep my hydro related stuff and the carbon filter exhausting to the top shelf and cut the rear wall of the top shelf out. will I need a centrifical fan to minimise noise? im on a limited budget and im not keen on dealing with aussieponics again, anyone have recommendations?